Profile Characteristic - Balluff BOS R254K-UUI-LH10-S4 Bedienungsanleitung

BOS R254K-UUI-LH10-S4
Photoelectric Sensors
6
System Functions (continued)
6.8

Profile Characteristic

6.8.1 Description
Profile Characteristic is a readable parameter that provides
information about which IO-Link profiles are supported. It
is used mainly to allow profile function modules of the
control unit to detect which profile or functions on the
device are available.
This parameter is defined in the IO-Link specification.
6.8.2 ISDU
Name
Profile Characteristic 0x000D (13)
Tab. 6-28: Profile Characteristic – ISDU
The parameter can be read via subindex 0 and consists of
multiple profile indices and function classes.
If a profile ID is specified, this means that all included
function classes are supported. If only sub-functions are
specified, these are output explicitly as an individual
function class (16-bit values in each case).
The following function classes are supported:
Variant Function Class ID
1 0x8000
0x8003
0x8004
0x8006
0x8007
0x8008
0x8009
0x800C
0x8100
2...4 0x8000
0x8001
0x8003
0x8004
0x8007
0x8008
0x8009
0x800C
0x8100
Tab. 6-29: Profile Characteristic – supported function classes
www.balluff.com
Index Subindex Access
0
Length Data Type
R 18 bytes UINT16[]
Name
Device Identification
Device Diagnosis
Teach Channel
Adjustable Switching Signal Channel
Teach-in Single Value
Teach-in Two Value
Teach-in Dynamic
Transducer Disable
Extended Identification
Device Identification
Type 0 Generic Profiled Sensor
Device Diagnosis
Teach Channel
Teach-in Single Value
Teach-in Two Value
Teach-in Dynamic
Transducer Disable
Extended Identification
Data Storage Default
n/a –
english 97