Checking The Operation; Securing The Tablet To The Holder - Pioneer SPH-T20BT Benutzerhandbuch

Checking the operation

Once connection and installation are completed, perform
the following operations and make sure that the unit
operates normally.
1
Check the connection and installation again.
NOTE
Check if there is an error in the connection and installation and check that
each connector is securely connected.
2
Attach the tablet to the holder.
3
Turn on the ignition.
4
Check the operation of this unit.
5
Check the power and turn off the ignition before moving on to
the next process.
10
En

Securing the tablet to the holder

1
With the tablet attached to the holder, attach the supplied
removable screw to the screw hole on the bottom of the holder.
NOTES
• When it is not necessary to detach the tablet, secure it to the holder with a
supplied removable screw.
• If you have removed the removable screw, please keep it in a safe place.