Charging; Charging The Battery - Parkside PMDSA 4 A1 Originalbetriebsanleitung

as you could come
into contact with
active parts.

Charging

Do not expose the
battery to extreme
conditions such as
heat and shocks.
There is a risk of
injury caused by
leaking electrolyte
solution! In case of
contact with eyes
or skin, rinse the
affected sites with
water or a neutrali-
zer and seek medi-
cal attention.
The battery must
only be charged up
in dry areas.
There is a risk of
personal injuries
from an electric
shock.
• The device may only be
powered with SELV (Safety
Extra Low Voltage) as indi-
cated by the label on the
appliance.
• Charge the battery before
using it for the first time.
• To charge the Li-ion battery
integrated in the appliance,
use only the XZ0900-
2400ENCG charger
supplied.
• Always comply with the
latest safety instructions,
as well as the regulations
and information relating to
environmental protection.
• Defects resulting from im-
proper handling are not
covered by the warranty.
Charging the
battery
1. Connect the charging
cable connector (7) to the
charging socket (3) on the
device.
2. Plug the charger (6) into a
socket.
3. The battery indicator (2)
lights up:
GB MT
103