Information About Electromagnetic Compatibility (Emc); Authorised Individuals; Liability Exclusion; Product Description - Renfert SYMPRESS Original Bedienungsanleitung

► The device may only be operated if the information on the identification plate conforms to the
specifications of your local mains power supply.
► Always unplug the unit from the wall outlet before beginning any work on the unit's electrical
en
components.
► Note any hazard or warning information provided by the material manufacturer.
► Do not operate in an explosion-prone area.
► It is the responsibility of the operator that national regulations during operation and regarding a
repeated safety inspection of electrical equipment are complied with.
For Germany these are MPBetreibV in relation with DIN EN 62353 (VDE0751).
► Only spare parts and accessories supplied or authorized by Renfert GmbH may be used with this
product. If other spare parts or accessories are used, this could have a detrimental effect on the
safety of the device, increase the risk of serious injury and lead to damage to the environment or
the device itself.
► Information on REACH and SVHC is available on our website www.renfert.com, in the Support
area.
2.5 Information about electromagnetic compatibility (EMC)
Information about electromagnetic compatibility (EMC) can be found in a separate section at the end of
these instructions.
2.6 Authorised Individuals
This product may not be used by minors under the age of 14.
Only properly trained individuals may operate and service the unit.
Any repairs not specifically described in these operating instructions may only be performed by a qualified
electrician or authorized dealers.
2.7

Liability Exclusion

Renfert GmbH shall be absolved from all claims for damages or warranty if:
► The product is employed for any purposes other than those cited in the operating instructions;
► The product is altered in any way other than those alterations described in the operating instruc-
tions;
► The product is repaired by other than an authorised facility or if any but Renfert OEM parts are
employed;
► The product continues to be employed, despite obvious safety faults or damage;
► The product is subjected to mechanical impacts or is dropped.
► We do not accept any liability for damage caused by mixing tips, foil bags or cartridges splitting.
3

Product Description

3.1

General Description

The SYMPRESS unit for mixing impression materials facilitates extrusion and mixing of 2-component
dental impression materials.
5:1 cartridges or foil bags in cartridge holders from different manufacturers can be used in the unit.
Only mixing nozzels should be used which are designated to the impression material by the manufacturer.
- 4 -