3. Slightly press on the jar while turning the jar clockwise until the arrow on the
blade assembly points to LIQUIFY. The motor starts agitating immediately. Do
not leave the appliance operating unattended.
4. Most types of food should be processed in short pulses. For this, turn the jar to
and fro several times.
5. When your food has reached the desired consistency, turn the jar counter-clock-
wise and pull it straight up to remove it.
Tip:
When processing hard ingredients using the grinding jar and the jar is too hot to
touch, grasp the blade assembly to turn the jar. In this case, you should generally
decrease the processing time.
6. Unplug the appliance, if you do not wish to use it again.
7. Turn the jar upright and wait some seconds for the food to drip from the blades.
Then unscrew the blade assembly by turning it counter-clockwise. Only hold the
blade assembly by its base to avoid cutting yourself.
8. Take out your food.
Tip:
You may store your food in the jar quite a while closed by one of the designated
lids. Twist the lid to seal and pour out as you like. However, you should not use
the jar for storing food in general to avoid discolouration and excessive wear. Do
not leave any food go bad within the jars.
9. After each usage, clean the appliance according to the instructions in chapter
'Care and Cleaning'.
Do not leave the appliance unattended while connected to the power
IMPORTANT:
supply. Always unplug the motor base when the appliance is not in use. After clea-
ning, it is best to store the blade assembly attached to an empty jar when not in use.
44