Troubleshooting - Klarstein VARICOOK SLIM 10031757 Bedienungsanleitung

TROUBLESHOOTING

Error code Possible cause
EO You are using unsuitable
cookware or the diameter is
smaller than 12 cm.
E1 Something is wrong with the
connection or the internal
circuit is broken.
E2 Problem with the temperature
sensor.
E3 The current voltage is too
high.
E4 The current voltage is too low.
ES The overheating protection
has been triggered.
E6 Problem with the fan or the
air inlet is blocked.
Suggested solution
Use suitable cookware with a
minimum diameter of 12 cm.
Have the device checked
and repaired by a specialist
company.
Have the appliance
checked and repaired by a
professional.
Check the power source and
connect the appliance to a
suitable power outlet.
Check the power source
and connect the device to a
suitable power outlet.
Wait a few minutes and let the
appliance cool down. Check
the cookware used.
Allow the unit to cool and
clean the vents. Then restart
the appliance. If the problem
persists, contact a specialist
company for inspection.
EN
31