Thrustmaster HOTAS Warthog Hardware-Benutzerhandbuch Seite 14

- Turn the module upside down and put it back in its place:
(In this position, the AFTERBURNER stop is now enabled)
- Put the removable bar back between the 2 throttle levers, then replace and re-tighten the
2 screws.
IMPORTANT NOTE: In order to avoid any possible damage to the AFTERBURNER module,
you must never use the throttle levers without the removable bar properly installed (using the
2 screws) between the 2 throttle levers.
13/18