Storage; Disposal/Environmental Protection - Parkside Performance PHDP 180 A1 Originalbetriebsanleitung

Storage

Information on storage
Always store the device and accessories:
• clean
• dry
• protected against dust
• protected against frost
• out of the reach of children
Preparing the device for
storage
NOTE! • The pressure washer and acces-
sories are destroyed by frost if they are not
completely emptied of water.
1. Completely empty the water from the
device.
- Disconnect the device from the water
supply.
- Turn on the pressure washer with the
on/off switch (30) for a maximum of
1 minute until there is no more water
coming out of the pistol grip (1) or
the attachments.
- Turn off the device.
2. Completely empty the water from the
accessories.
3. Store all attachments upright in the hol-
ders with the connection facing down-
wards.
4. Roll the high-pressure hose around the
hose reel.
5. Store the mains connection cable in the
holder (11) provided.
Disposal/environmental
protection
The device, accessories and packaging
should be properly recycled.
Electrical devices must not be dispo-
sed of with domestic waste.
• Take the device to a recycling plant.
The plastic and metal parts used on
your device can be properly sorted
according to materials and grades and
efficiently recycled. Please contact our
service centre for more information.
• We will dispose of defective devices
you ship to us free of charge.
Dispose of the batteries according
to local regulations. Hand in the
batteries at a used battery collec-
tion point where they are recycled
in an environmentally friendly man-
ner. For more information, please
contact your local waste manage-
ment provider or our service centre.
GB MT
55