Technical Data; Safety Information; Meaning Of The - Parkside Performance PHDP 180 A1 Originalbetriebsanleitung

GB MT

Technical data

High-pressure washer
Rated voltage (U)
Frequency
Rated output (P)
Mains connection cable length
Protection class
Protection type
Weight incl. accessories (m)
Length of high-pressure hose
Pressure rating/working pressure (p)
Max. permitted pressure (pmax)
Max. intake pressure (pin;max)
Max. intake temperature (Tin;max)
Rated flow rate (Q)
Max. rated flow rate
(Qmax)
Sound pressure level (L
Sound power level (L
—measured 95.5 dB(A); K
—guaranteed
)
Vibration (a
h
44
PHDP 180 A1
230 V~
50 Hz
3000 W
21.6 kg
15 MPa
18 MPa
0.8 MPa
40 °C
540 l/h (9 l/min)
600 l/h (10 l/min)
)
pA
77.24 dB(A); K = 3 dB
pA
)
WA
= 2,55 dB
WA
98 dB(A)
≤2.5 m/s
This appliance is intended to be operated
using a mains supply network with a
system impedance Zmax on the transfer
point (house connection) of maximum
0.3206 Ohm. The user must ensure that
the device is only operated using a mains
supply network that meets the require-
ments. If necessary, local power supply
5 m
companies can be consulted with regards
I
to the system impedance.
IPX5

Safety information

10 m
This section deals with the basic safety
instructions for using the device.

Meaning of the

safety information
DANGER! • If you do not observe this
safety instruction, an accident will occur.
The result of which is severe bodily injury
or death.
WARNING! • If you do not observe
this safety instruction, an accident may
occur. The result of which is likely severe
bodily injury or death.
CAUTION!! • If you do not observe
this safety instruction, an accident will
2
occur. The result of which is likely minor or
moderate bodily injury.
NOTE! • If you do not observe this safety
instruction, an accident will occur. The
result of which is possible damage to pro-
perty.