Ordinary Maintenance; Important Information • Maintenance • Packaging • Use - AERMEC VES-Serie Installationsanleitung

IMPORTANT INFORMATION AND MAINTENANCE
WARNING: The fan coil unit is
connected to the power supply
network and the hydraulic circuit.
Any intervention by personnel not
technically qualified can result in
injury to the operator and damage
to the unit and the surrounding
environment.
ONLY PROVIDE A POWER SUPPLY OF
230V ~ 50Hz TO THE FAN COIL UNIT
Using other power supply ratings can
cause irreparable damage to the fan coil
unit.
DO NOT USE THE FAN COIL UNIT
IMPROPERLY
Do not use the fan coil unit in animal
husbandry applications.
VENTILATING THE ROOM
Periodically air the room in which the
fan coil unit has been installed; this is
particularly important if the room
is occupied by many people, or if gas
appliances or sources of odours are
present.
C O R R E C T LY C O N T R O L L I N G T H E
TEMPERATURE
The room temperature should be
controlled in order to provide maximum
comfort to the people in the room,
especially if they are elderly, children
or ill, avoiding sudden changes in
temperature between the outside and
inside above 7 °C in summer.
A too low temperature will lead to
increased electrical consumption in the
summer.
CORRECTLY ADJUSTING THE AIR JET
The air coming out of the fan coil unit
must not strike people directly; in fact,
even if at a temperature that is higher
than the room temperature, it could
cause a cold sensation and resulting
discomfort.

ORDINARY MAINTENANCE

The ordinary maintenance can be carried
out by the user and consists of a series
of simple operations, which will ensure
that the fan coil unit operates at full
REMOVAL AND REFITTING OF THE AIR
FILTER
To clean the air filter it must be removed
from the fan coil unit.
The cleaned or new (replaced) filter must
be fitted and correctly locked into its fan
coil unit mount.
To remove the air filter:
- rotate by 90° the two filter locks.
- withdraw the filter from its mount.
To refit the cleaned air filter:
PACKAGING
The fan coil units are shipped in standard packaging which consists of expanded polystyrene foam and cardboard.
USE
Refer to the control panel manual for operating use and installation.
efficiency.
Visual inspection of the state of the
fan coil unit for every maintenance
o p e r a t i o n ; a n y f a u l t m u s t b e
communicated to the After-Sales Service.
EXTERNAL CLEANING
- External weekly cleaning, to be done
with a damp cloth (soaked in water
no hotter than 40 °C) and a neutral
detergent: avoid using any other type of
detergent or solvent.
- Do not splash water on interior or
exterior surfaces of the fan coil unit (it
could cause short circuits).
PERIODIC FILTER CLEANING
Frequent filter cleaning ensures a better
operating efficiency.
Check if the filter is very dirty: in this case
increase the cleaning frequency.
Clean frequently by removing the
accumulated dust with a vacuum
cleaner.
When the filter is clean refit it to the
fan coil unit reversing the removal
procedure.
SPECIAL CLEANING
The possibility of removing the fan coil unit
inspection panels (carried out only by
personnel suitably qualified) allows detailed
cleaning of the internal parts, particularly
for installations with high occupancy or
requiring elevated hygiene standards.
DURING OPERATION
Always leave the filter in the fan coil unit
during operation otherwise dust in the air
will dirty the surfaces of the coil.
WHAT IS NORMAL
During cooling, water vapour may be
present in the air discharge.
During heating it might be possible to
hear a slight hiss around the fan coil
unit. Sometimes the fan coil unit might
give off unpleasant smells due to the
accumulation of substances from the air
of the room (especially if the room is not
ventilated regularly. Clean the filter more
often).
During operation, there could be noises
- insert the air filter into its mount.
- rotate the two filter locks to secure the
filter.
- ensure the filter is correctly secured in its
mount.
and creaks inside the unit, due to
the thermal expansion of the various
components (plastic and metallic), but
this does not indicate a malfunction
and does not cause damage to the
unit unless the maximum input water
temperature is exceeded.
OPERATING FAULTS
In the event of an operating fault
disconnect and reconnect power to
the unit and proceed with restarting
the device.
WARNING! Do not attempt to repair the
unit as this is very dangerous!
If the problems persists immediately
call the local After-Sales Service.
DO NOT PULL THE ELECTRICAL CABLE
It is very dangerous to pull, tread on or
crush the electrical power cable or fix it
with nails or drawing pins.
A damaged power cable can cause short
circuits and personal injury.
DO NOT PUT ANYTHING IN THE AIR
OUTLET
Do not put anything at all in the air outlet
slots.
This could cause injury to people and
damage to the fan.
WARNING
The device can be used by children aged
under 8 years old and people with
reduced physical, sensory or mental
capabilities, or lack of experience or the
necessary knowledge provided under
supervision or after the same have been
instructed relating to the safe use of the
equipment and the understanding of
the dangers inherent in it. The Children
should not play with the appliance. The
cleaning and maintenance intended
to be performed by the user should
not be performed by children without
supervision. Please note that the boiler
should not be used by children as a play
17