Technical Data; Eu-Conformity - Würth ERGOPOWER PAD I Bedienungsanleitung

OPERATION
• Connect the USB-C cable to the charger (both
included) and the charging pad (input).
• Connect charger to mains socket (100...240 V AC).
• The control lamp on the charging pad lights up green.
• Only place the lamp recommended by the man-
ufacturer on the charging pad. The control lamp
lights up red.
• Switch off the light during charging.
• The charging process is completed as soon as the
indicator lamps on the lamp light up permanently.
• Do not charge the lamp longer than necessary to
avoid overheating.

TECHNICAL DATA

Input voltage power supply unit
Input voltage charging pad
Current consumption PAD I
Current consumption PAD II
Output power USB port
Output power of each pad
Storage temperature
Operating temperature
Frequency band
Maximum transmitted power
MAINTENANCE / CARE
Visual inspection before starting work
The charging pad is maintenance-free. The charging
pad and its accessories must nevertheless be checked
for external damage before each use.
The charging pad may not be used when
damage is visible. It must be repaired or disposed
of by a commissioned and trained person. Please con-
tact your Würth branch.
Cleaning
Cleaning work may only be performed when the
charging pad is switched off and the mains connec-
tor has been disconnected. Clean the charging pad
by wiping it with a soft, clean cloth. Remove stubborn
dirt with a moistened cloth and a common household
cleaner. Using cleaning agents that are abrasive or
contain alcohol or solvent will damage the housing.
8
100 - 240 V AC, 50/60 Hz
5 V DC
max. 1 A
max. 2 A
5 V DC, max. 1A
5 V DC, max. 1A
-20°C ~ +50°C
-10°C ~ +35°C
110 - 205 kHz
5 W
DISPOSAL
Do not dispose of the charging pad with
domestic waste!
Small electrical devices and packaging must
always be recycled in an environmentally
appropriate manner. Electrical tools that are
no longer usable must be separately col-
lected and forwarded for environmentally appropri-
ate recycling according to the European Directive
2012/19/EU.
WARRANTY
We offer a warranty according to the legal/
state-specific regulations from the date of purchasing
(proof by invoice or delivery note) for this charging
pad. A damaged charging pad is either repaired or
replaced with a substitute charging pad.
Damage resulting from improper handling is
excluded from the warranty. Complaints can only be
accepted if the charging pad is handed over assem-
bled to a Würth branch, your Würth sales represent-
ative or a Würth-authorised customer service centre.

EU-CONFORMITY

WÜRTH confirms that the charging pad
meets the necessary and relevant safety
requirements of one or more directives and
standards.
Hereby WÜRTH declares that the radio equipment
type ERGOPOWER CHARGING PAD is in compliance
with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following
internet address: www.wurth-international.com/partner