Longitudinal Turning; Plain Turning And Recessing; Fixing The Lathe Slide; Turning Between Tips - HOLZMANN-MASCHINEN ED400FD Betriebsanleitung

19.5.2 Longitudinal Turning

19.5.3 Plain Turning and Recessing

19.5.4 Fixing the Lathe Slide

19.5.5 Turning between Tips

HOLZMANN MASCHINEN GmbH
During facing, the planer tool is moved parallel to the axis
of rotation. The feed is carried out either manually by
turning the handwheel on the lathe slide or on the upper
slide or by switching on the automatic feed. The infeed for
the cutting depth is effected via the cross slide.
When facing, the turning tool is moved at right angles to
the axis of rotation. The feed is done manually with the
handwheel of the facing slide. The feed of the cutting depth
is effected by the top slide or the bed slide.
The cutting force occurring during facing, grooving or
cutting-off operations can cause the lathe slide to move.
Therefore fasten lathe slide with the fixing screw.
www.holzmann-maschinen.at
Workpieces that require a high concentricity are
machined between the tips. A centre hole is
drilled in both face turned faces of the
workpiece. The turning heart is clamped onto
the workpiece. The driving pin, which is screwed
into the chuck flange, transmits the torque to
the rotary heart. The fixed centering point is
located in the centre hole of the workpiece on
the spindle head side. The rotating center point
is located in the centering hole of the workpiece
on the tailstock side.
OPERATION
57
ED400FD | ED400FDDIG