Other Functions Available On The Phone; Filtering The Area Code; Setting A Code Number For An Outside Line; Making Calls With The Number For An Outside Line - Olympia 4510 Bedienungsanleitung

Other Functions Available on the Phone

FILTERING THE AREA CODE

Other Functions Available on the Phone
This chapter provides information on the other functions provided on the phone.
Filtering the Area Code
Phone numbers are normally transmitted together with the appropriate area code. As a
result, the phone number shown in the phone display could become confusing.
If you set-up the phone to filter out the area codes, only the actual phone number of the
caller will be displayed when a local call is received.
Navigate to the SET 2 CODE menu.
1
Press the
2
Press the
3
Press the
4
Repeat steps 3 and 4 to set the remaining digits of the code.
5
Press the
6

Setting a Code Number for an Outside Line

This setting is only required when your phone is connected to a PABX sys-
tem (public access branch exchange). The feature should only be set-up by
competent persons who understand the function.
If you use a PABX system, you must enter the number to access an outside line (nor-
mally a "0"). You must also set this number in the phone in order to be able to call back
callers from the call lists or to insert the number for an outside line later.
Navigate to the SET 3 PCODE menu.
1
Press the
2
Press the
3
Press the
4
Repeat steps 3 and 4 to set the remaining digits of the code.
5

Making Calls with the Number for an Outside Line

The number for an outside line must be set-up before being used for the first time (refer
to Section Setting a Code Number for an Outside Line on Page 36).
Select the phone number required. You can also select an entry from the call lists.
1
Press the
2
precede the actual phone number.
Lift the receiver.
3
36
key. CODE ------ appears in the display and the first "-" flashes.
or key to select the 1st digit of the area code.
key to confirm the entry.
key again to save the setting.
key. PCODE -- appears in the display and the first "-" flashes.
or key to select the first digit of the code.
key to confirm the entry.
key twice. The number to access an outside line is inserted to
Model 4510
G