Haier HTF-508DGS7 Bedienungsanleitung Seite 19

Use
Select the working mode
You may need to select one of the following two ways to set the appliance:
1) Auto Set mode
Under Auto Set mode, the appliance can automatically adjust the temperature setting ac-
cording to the ambient temperature and temperature change in the appliance. If you do
not have any special requirements, we recommend that you use Auto Set mode (refer to
Auto Set mode later on).
2) Manual adjusting mode:
If you want to manually adjust the temperature of the appliance in order to store a par-
ticular food, you can set the temperature via a temperature adjusting button (refer to
ADJUST THE TEMPERATURE).
1.
3.
Fridge
16
Door opening alarm
When the refrigerator door is opened for more than 1
minute, the door opening alarm will sound. The alarm
can be silenced by either closing the door or touching
the control panel. If the door is left open for more than
7 minutes, the light inside the compartment and con-
trol panel illumination will automatically switch off .
Adjust the temperature
The indoor temperatures are infl uenced by the follow-
ing factors:
▶
▶
▶
▶
2.
Adjust the temperature for fridge
1. Unlock the panel by pressing button "G" if it is
Fridge
2. Press button "A" (Fridge) for select the fridge
3. Press button "A" to set the fridge temperature.
If no key is operated in 5 sec., the setting confi rms au-
Ambient temperature
Frequency of door opening
Amount of stored foods
Installation of the appliance
locked.
compartment. An alarm sounds. The actual
temperature in the refrigerator compartment is
displayed.
A signal will sound at each key press.
The temperature increases in sequences of 1°C
from a minimum of 1°C (OF) to a maximum of
9°C, switching to 1°C again when pressing further.
The optimum temperature in the refrigerator is
5 °C. Colder temperatures mean unnecessary
energy consumption.
EN