reer IP BabyCam Move Gebrauchsanleitung Seite 23

6. Press and hold the pairing button on the underside of the camera
until a voice confirms that the camera is in pairing mode. In pairing
mode the Wi-Fi indicator light blinks purple.
7. Make sure that your mobile device is connected to your 2.4 GHz Wi-Fi
network. Enter your Wi-Fi password and press enter to confirm.
8. Hold your mobile device, with the generated QR code in front of the
camera, at a distance of approx. 20 cm. If the camera doesn't recog-
nise the QR code, try moving the mobile device towards the camera
and back again. When the camera has successfully scanned the QR
code you will receive voice confirmation.
9. The camera will now connect to the Wi-Fi network automatically. This
connection process takes about 30 seconds. When the camera has
connected to the Wi-Fi network successfully, its Wi-Fi indicator will
glow blue and it will audibly confirm the connection. If pairing is not
successful, please repeat points 5 to 8.
10. The next step is to select your camera and assign it a name. The
camera's name can be changed at any time in the camera options.
11. After successful pairing your camera will be ready to use and will
appear in the main menu of the reer IP BabyCam Move app. If the
lighting conditions are sufficient the camera will transmit a colour
image to the display. If there is insufficient light, night vision mode
is automatically activated. In this case, only a black-and-white image
will be transmitted.
- 23 -
GB