Conceptronic Media Giant Benutzerhandbuch Seite 41

ENGLISH
This chapter will explain how you can connect the Media Giant to your TV, home cinema system, network,
etc.
9 10
14
Connecting the antenna cable(s) **
Note: The Tuner of the unit supports Signal Pass-through, to redirect the TV signal from the Tuner input
to the Tuner output.
• Disconnect the main antenna cable from your TV, and connect it to the Tuner input [10] of the unit.
• Connect the supplied antenna cable to the Tuner output [9] of the unit and to the Tuner input of your
TV.
Connecting the Video Cable(s)
You can connect the unit in 4 different ways to your TV:
- HDMI
- Composite
- SCART (by using the Composite cable & Scart Adapter)
- S-Video *
- Component *
* When using S-Video or Component, only the video signal is send to your TV.
For the audio signal, use the Audio RCA Jacks on the Composite cable (Red, White), or the digital
audio output (optical or coaxial) of the media giant.
HDMI:
• Connect the HDMI cable to the HDMI output [15] of the unit.
• Connect the other end of the HDMI cable to a free HDMI input on your TV.
Composite:
• Connect the Composite cable (Yellow, Red, and White) to the corresponding AV OUT jacks [11, 19] on
the unit.
• Connect the other side of the Composite cable (Yellow, Red, and White) to your TV.
6. Connecting your Media Giant
15 16 17 18
11 12
19 20 21 22
41
13
23