LENCO SCD-100BK Bedienungsanleitung Seite 9

To replace a new battery, please refer to the figure shown below. When inserting a battery, be sure to do so in the proper direction.

If the remote control conflicts with other devices, the operation will be affected.

Do not simultaneously press buttons on the unit and the remote control.

Avoid using two remote controls at the same time as it will cause a malfunction.

Use only CR-2025 size batteries.

If there is battery leakage, clean the remote control thoroughly before replacing batteries.

Do not short two terminals of the batteries. Dispose old batteries in a suitable place.
9