General Safety; Safety Instructions - ZANKER KDT10053FK Benutzerinformation

General Safety

This appliance is intended to be used in household and similar
•
applications such as:
farm houses; staff kitchen areas in shops, offices and other working
–
environments;
by clients in hotels, motels, bed & breakfast and other residential type
–
environments.
Do not change the specification of this appliance.
•
The operating water pressure (minimum and maximum) must be between
•
0.5 (0.05) / 8 (0.8) bar (MPa)
Follow the maximum number of 13 place settings.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its
•
Authorised Service Centre or similarly qualified persons in order to avoid a
hazard.
Put the cutlery in the cutlery basket with the sharp ends pointing down or
•
put them in the cutlery drawer in a horizontal position with the sharp edges
down.
Do not leave the appliance with the open door unattended to avoid
•
stepping accidentally onto it.
Before any maintenance operation, deactivate the appliance and
•
disconnect the mains plug from the socket.
Do not use high pressure water sprays and/or steam to clean the
•
appliance.
If the appliance has ventilation openings in the base, they must not be
•
covered e.g. by a carpet.
The appliance is to be connected to the water mains using the new
•
supplied hose-sets. Old hose sets must not be reused.

Safety instructions

Installation
Warning! Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in the
built-in structure due to safety manner.
• Follow the installation instructions supplied with the
appliance.
• Always take care when moving the appliance as it is
heavy. Always use safety gloves and enclosed
footwear.
• Do not install or use the appliance where the
temperature is less than 0 °C.
• Install the appliance in a safe and suitable place that
meets installation requirements.
3