Directions For Disposal; Specifications Supplied; Installing The Appliance - Bosch KAN90-Serie Gebrauchs- Und Montageanleitung

General requirements
The appliance is suitable for the following tasks:
Chilling and freezing food,
■
Making ice cubes.
■
This appliance is intended for use up to a maximum
height of 2000 metres above sea level.
This appliance is intended for domestic use in private
households and for a domestic environment.
The appliance is fitted with interference suppression in
accordance with EU Directive 2004/108/EC.
The refrigeration circuit has been checked for leak
tightness.
This product complies with the applicable safety
requirements for electrical appliances
(EN 60335-2-24).

Directions for disposal

* Disposing of packaging
The packaging protects your appliance from damage
during transport. All the materials used are
environmentally friendly and can be recycled. Please
help by disposing of the packaging in an
environmentally responsible manner.
Information about the available disposal methods and
sites can be obtained from your appliance retailer or
your local authority.
* Disposing of your old appliance
Used appliances are not valueless waste. Valuable raw
materials can be recovered through environmentally
responsible disposal.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning
used electrical and electronic appliances (waste
electrical and electronic equipment - WEEE).
The Directive determines the framework for the
return and recycling of used appliances as
applicable throughout the EU.
m
Warning
Appliances at the end of their useful life:
1. Unplug the mains plug.
2. Cut the power cord and remove it along with the
mains plug.
3. Do not remove the shelves and containers. Leaving
them intact makes it more difficult for children to
climb in.
4. Never let children play with a disused appliance.
Risk of asphyxiation!
Refrigerators contain refrigerant as well as gases in the
insulation material. Refrigerant and gases must be
disposed of properly. Do not damage the refrigerant
circuit pipes before disposing of them properly.

Specifications supplied

After unpacking the appliance, check all parts for
transport damage.
If you find any defects, contact the retailer from whom
you purchased the appliance or our After-sales Service.
The appliance supplied consists of the following
components:
Free-standing appliance
■
Features (vary depending on the model)
■
Bag of assembly materials
■
Instructions for use and installation
■
Service record
■
Guarantee slip
■
Information on energy consumption and noise
■

Installing the appliance

Transport
The appliance is heavy and must be securely fixed
when being transported and installed.
Because of the weight and size of the appliance, and in
order to minimise the risk of personal injury or damage
to the appliance, at least two persons are required for
moving and positioning the appliance safely.
The castors are provided for installation purposes only.
Do not use the castors for transporting the appliance.
Do not move the appliance over uneven or soft ground
on its castors.
Installation site
The ideal installation site is a dry, well ventilated room.
The appliance should not be installed in a position that
is exposed to direct sunlight or close to a source of
heat, such as a cooker or radiator. If installation near to
a source of heat is unavoidable, use a suitable
insulating panel or keep to the following minimum
distances from the source of heat:
3 cm from an electric or gas cooker.
■
30 cm from oil or solid fuel cookers.
■
en
25