English - LENCO CR-19WH Bedienungsanleitung

English

1. TU-/HOUR
2. PRE/M+
3. VOL-/AL1
4. SNOOZE
5. TIME
6. SLEEP
7. VOL+/AL2
8. TU+/MIN
9. ON/OFF
10. Display
Radio
1. Press the "ON/OFF" button to turn the clock radio on or off.
2. Adjust the "TU+" or "TU-" to select the desired station.
3. Press the "VOL +" or "VOL -" button to adjust the volume.
4. Press the "M+" button to store your desired station. The display will show the "P01" means your station
will be saved on the first pre-set. If it displays "P02" this means the station is saved in the second pre-set.
5. To store the tuned station, press and hold the "PRE/M+" button until the display shows flashing "P01".
Under this condition short press to confirm station to store in this memory location. "P01" will stop to flash
to feedback station is stored. Tuned another station and long press "PRE/M+" button until the display
shows "P02" flashing then short press to confirm. Repeat this procedure until 10 memories are stored.
Please note you can only recall the preset station until you save all 10 stations.
11. AL1 Buzzer Indicator
12. AL1 Radio Indicator
13. AL2 Buzzer Indicator
14. AL2 Radio Indicator
15. Sleep Indicator
16. Speaker
17. FM Antenna
18. USB Charging
19. DC IN Jacket
CR-19WH