Crank Adjustment; Fitting And Using The Sliding Top; Wire Management - Konig + Neurath TALO.S Montageanleitung

3.

Crank adjustment

Pull the crank (a) out of its
holder.
Turn the crank to the left or
right (b) to set the desired
height, which is adjustable
in the range 620 - 860 mm as
indicated on the scale on the
lower leg.
Maximum load: 30 kg
4.
Fitting and using
the sliding top
Slide the fittings (a) on the
desk top to an open position.
Position the top (b) and lock
the fittings (c) onto the desk
frame.
Pull the centrally located re-
lease handle (d) downwards
to undo the safety lock on the
sliding top.
The handle locks in a closed
position – the top can only
be removed if it is open.
5.

Wire management

Attach the umbilical (a) using
the sprung clamp across the
slot in the cable tray, and
run the cable through the
umbilical into the tray.
The cable tray brackets (b)
are clamped to the frame.
They are used on desks
without a sliding top and
on link desks.
(a)
(c)
(a)
21
(b)
(b)
(b)
(a)
(a)
(d)