Height Adjustment Of The Desk - Konig + Neurath TALO.S Bedienungsanleitung

Height adjustment of the desk

Caution !
Only operate the manual release if the specified weight
is being supported by the frame.
Put the payload onto the desk (monitor, CPU, etc). The payload
must be within ± 10 kg of the payload stated on the information
label.
To adjust the height of the desk, one hand is placed on the desk
top with slight pressure applied, the other hand is used to operate
the release handle and guide the desk into the required position.
Depending on whether the payload is too high or low, the
desk can rise up or drop down of its own accord.
22