Konig + Neurath TALO.S Bedienungsanleitung Seite 29

Fitting the desk screen
(a) Insert the twist connector into the desk adapter and tighten the
grub screw (SW 3).
(b) Insert the screen and align it laterally. Tighten the screw (SW 4)
on the rear of the adapter.
(c) Push the twist connector on to the frame (on desks without
adapter cutouts) and tighten the lower set screw (SW4). Insert
and align the screen and tighten the screw (SW4) on the rear of
the adapter. Fit the plastic trays into the tool rails (no tools
required)
(a) (b)
28
(c)