Cleaning And Transport; Storage; Maintenance; Disposal And Recycling - Scheppach 5906301901 Original Bedienungsanleitung

If you return a motor, always send back the entire
drive unit with switch.

10. Cleaning and transport

Warning!
Always pull the mains plug out of the mains socket
before carrying out any work on the electric tool itself
(e.g. transport, installation, conversion, cleaning and
maintenance work)!
• Keep the suction device and the air vents clean.
• Prior to starting your work, check the filling level of
the dust bag.
• Clean the suction device with a brush or moist
cloth.
• Do not use cleaning agents.

11. Storage

Store the device and its accessories in a dark, dry
and frostproof place that is inaccessible to children.
The optimum storage temperature is between 5 and
30˚C.
Store the electrical tool in its original packaging.
Cover the electrical tool in order to protect it from dust
and moisture.
Store the operating manual with the electrical tool.

12. Maintenance

Warning! Prior to any adjustment, maintenance or
service work disconnect the mains power plug!
Connections and repairs
Connections and repairs of electrical equipment may
only be carried out by an electrician.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
Wear parts*: Carbon brushes, filter bag, suction hose,
nozzle inserts, V-belts
* Not necessarily included in the scope of delivery!
18 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

13. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective com-
ponents must be disposed of as special waste. Ask
your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of waste
equipment may have negative consequences for the
environment and human health due to potentially
hazardous substances that are often contained in
electrical and electronic equipment. By properly dis-
posing of this product, you are also contributing to the
effective use of natural resources. You can obtain in-
formation on collection points for waste equipment
from your municipal administration, public waste dis-
posal authority, an authorised body for the disposal of
waste electrical and electronic equipment or your
waste disposal company.