Introduction; Device Description; Scope Of Delivery; Intended Use - Scheppach 5906301901 Original Bedienungsanleitung

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regu-
lations that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
14 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for the
operation of machines of the same type must be ob-
served.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

2. Device description

1. Case
2. On/off switch
3. Clamp for case cover
4. Carrying handle
5. Power cable
6. Suction hose
7. Suction/blowing nozzle
8. Suction nozzle, flat
9. Borehole-suction nozzle
10. Lid for dust bag
11. Dust bag
12. Dust filter
13. Clamping bracket
14. Suction nozzle
15. Suction grating
16. Connector for suction
17. Connector for blowing

3. Scope of delivery

• Suction device
• Suction hose ø 40 mm
• Hose coupling ø 35 mm
• Suction nozzle, flat / bore-suction nozzle
• Suction-blowing nozzle
• Filter bag
• Operating instructions

4. Intended use

• The machine is designed and built according to the
state-of-the-art and the safety-related standards.
Nevertheless, the use of the machine might involve
risks such as personal injury, danger to life for the
user or third parties, or damage to the machine and
other material property.
• The machine is to be used only in a technically
flawless condition as well as in accordance with
the manufacturer's instructions and in a safety and
risk-conscious manner while adhering to the oper-
ating instructions! In particular, failures which may
impair the safety must be resolved immediately (by
you or an expert)!
• The extraction unit is used to suck off splinters or
chips which are created while processing wood or
wood-based materials.