Clatronic AR 760 DVD/TFT Bedienungsanleitung, Garantie Seite 76

Time Form
"12H" is the default setting. User can use the Encoder Vol Knob to choose the Time Format between "12
Hours" & "24 Hours"
AV Jack
The panel AV Jack is default as "AV In" source. User can use the Encoder Vol Knob to select "OUT". Once
"OUT" is selected, the panel AV jack is changed as an AV OUTPUT ( AV OUT ) of the Audio / Video Signal of
this unit's Built-in DVD player.
This AV Out selection is useful for user by simply plug and connect to any external TFT system without
any extra installation.
Camera
"OFF" is set as default. If user connected a back up camera system to this unit, user should choose Camera
"ON" mode. Once "ON" is selected, & the vehicle is in Reverse Gear ( Backup mode ), the front in-dash TFT
display will automatically switch to Back Up Camera Video signal regardless whatever mode is currently dis-
played on the front in-dash TFT.
If connected to a back up camera system but this option is selected to "OFF" mode, User still can press
the mode button to switch "AV In 1" to display the Back Up Camera Video on the front in-dash TFT.
Tuner Set
User can use the Encoder Vol Knob to select between Local or Distance mode. This feature is used to desig-
nate the strength of the signals at which the radio will stop during automatic tuning. "Distance" is the default
setting, allowing the radio to stop at a broader range of signals. To set the unit to select only strong local sta-
tions during automatic tuning, rotate the Encoder Vol Knob button until "Local" appears on the display.
Tuner Area
User can use the Encoder Vol Knob to select the frequency spacing which is most appropriate for the area this
unit is used in, U.S.A. South America, Europe or Oirt. (Russia Band)
Beep Tone
The beep tone feature allows the selection of an audible beep tone when a button is pressed. "BEEP TONE
On" is the default setting. Rotate the Encoder Vol Knob to select the "BEEP TONE Off" option
Programmable Turn-on Volume (VOL PGM)
This option allows the adjustment of the volume level of the radio will automatically assume when turning on.
"VOL PGM 12" is the default setting. To program a specific turn on volume level, use the Encoder Vol Knob to
select "VOLUME LEVEL" within 5 seconds.
Rear Speaker On/Off (Rear Spk)
Rear speaker is set to 'ON' by default. If OFF is selected, the rear speaker's audio output will be TURNED
OFF. This function is useful while listening with the HEADPHONE and user doesn't need Rear Speakers
sounds output through rear speakers. Select "ON" to reactivate the rear speakers sound output
When the Rear Speaker is 'OFF', the Audio Function, 'FADER', will not be functional
Inter Amplifier On/Off (Inter Amp)
This is a option selection for user to turn the unit's built-in Amplifier system on or off. "OFF" is the default set-
ting. This option is useful for user if connected to an external Amplifier & the user do not want audio output of
the built-in amplifier system.
All manuals and user guides at all-guides.com
76