Fitting The Railing - Konig + Neurath TALO.S Bench Montageanleitung

14. Fitting the railing

(b)
Remove cover (a).
Mount profile (b) on the (a)
adapter (c) using socket
head screws M6x20
(SW5).
(c)
Note: pre-assembled
adapters must be disas-
sembled.
Remove end caps (d).
(d)
Mount adapter on the
bracket (e), using socket
head screws M6x10
(e)
(SW5).
Insert cable clip (f) into
profile groove.
(f)
26