Sentiotec VitaMy 164 Montage- Und Gebrauchsanweisungen Seite 22

Instructions for installation and use
Fig. 21: Installation of Door Fitting 1
Screw the two door fittings onto the fix-glass element, making sure of the straight
alignment of the fittings and that the door opens to the outside.
The fittings are aligned through the adjustment/rotation of the two plastic
rings.
Fig. 22: Installation of Door Fitting 2
Follow the steps in Abb. 22 and Abb. 23 again to connect the door leaf with the
fix glass element.
Finally, set the blind in place and attach it firmly by tightening the Allen screw.
p. 22/40