Nice Wingo 4024 Kit Installierungs-Und Gebrauchsanleitungen Und Hinweise Seite 6

CAUTIONS: • The technical features set out refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.a. reserves the right to make alterations to the prod-
uct any time it deems it necessary, keeping the same functionality and destination of use.
Type
Power input
Maximum absorption
Nominal absorption
Maximum absorbed power
Nominal absorbed power
Protection grade
Travel
Speed loadless
Maximum force
Nominal force
Operating temperature
Cycles/h at nominal torque
Durability
Insulation class
Dimensions (mm)
Weight (kg)
CE declaration of conformity and declaration of incorporation for a "quasi-machine"
Declaration in accordance with Directives: 2004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Note - The content of this declaration corresponds to the declaration made in the official document filed in the offices of Nice S.p.a., and particularly the
latest version thereof available prior to the printing of this manual. The text contained here has been adapted to meet editorial requirements. A copy of the
original declaration may be requested from Nice S.p.a. (TV) I.
Declaration number: 143/WINGO
Name of manufacturer: NICE S.p.A.
Address: Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy.
Person authorized to provide technical documentation: NICE S.p.A. – Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy.
Product type: Electric gearmotor for swing gates.
Model / Type : WG4000, WG4000/V1, WG5000, WG5000/V1, WG4024, WG5024, WG3524HS
Accessories: No accessory.
The undersigned Mauro Sordini, as Chief Executive Officer, hereby declares under his own responsibility that the products identified above comply with the
provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 15 2004 concerning alignment of Member States' legislation
regarding electromagnetic compatibility and abrogating directive 89/336/EEC, according to the following harmonized standards: EN 61000-6-2:2005;
EN 61000-6-3:2007 + A1:2011.
The product also complies with the following directive in accordance with the requirements for "quasi-machines":
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and amending directive 95/16/EC (con-
solidated text).
– I declare that the pertinent technical documentation has been prepared in accordance with Annex VII B to Directive 2006/42/EC and that the following
essential requirements have been met:
1.1.1 - 1.1.2 - 1.1.3 - 1.2.1 -1.2.6 - 1.5.1 -1.5.2 - 1.5.5 - 1.5.6 - 1.5.7 - 1.5.8 - 1.5.10 - 1.5.11.
– The manufacturer agrees to send the national authorities pertinent information on the "quasi-machine" in response to a motivated request without affect-
ing its intellectual property rights.
– If the "quasi-machine" is operated in a European country with an official language other than the language used in this declaration, the importer must as-
sociate a translation with this declaration.
– The "quasi-machine" must not be operated until the final machine in which it is to be incorporated is declared to conform to the provisions of Directive
2006/42/EC, if applicable to it.
The product also complies with the following standards: EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 +
A15:2011; EN 60335-2-103:2003 + A11:2009.
The parts of the product which are subject to the following standards comply with them: EN 13241-1:2003 + A1:2011; EN 12445:2002; EN 12453:2002;
EN 12978:2003 + A1:2009.
Oderzo, 30 April 2015
4 – English
TECHNICAL FEATURES OF THE PRODUCT
WG4024 WG5024
electromechanical gear motor for gates or doors with leaf opening
24 V 24 V
3,5 A 3,5 A
2 A 2 A
85 W 85 W
50 W 50 W
IP 44 IP 44
320 mm 470 mm
0,018 m/s 0,016 m/s
1500 N 1500 N
500 N 500 N
40 40
estimated between 80,000 and 250,000 cycles of manoeuvres according to the conditions set out in Table 2
A A
770 x 98 x 95 h 920 x 98 x 95 h 770 x 98 x 95 h 770 x 98 x 95 h 920 x 98 x 95 h 920 x 98 x 95 h 920 x 98 x 95 h
6 6
Revision: 9 Language: EN
WG4000 WG4000/V1
230 V~ 50 Hz 120 V~ 60 Hz
1,5 A 1,5 A
0,5 A 0,5 A
200 W 200 W
130 W 130 W
IP 44 IP 44
320 mm 320 mm
0,016 m/s 0,020 m/s
1500 N 1500 N
500 N 500 N
-20 °C to +50 °C
30 30
F F
6 6
WG5000 WG5000/V1
230 V~ 50 Hz 120 V~ 60 Hz
1,5 A 2,5 A
0,5 A 1 A
200 W 200 W
130 W 130 W
IP 44 IP 44
470 mm 470 mm
0,013 m/s 0,016 m/s
1700 N 1700 N
600 N 600 N
30 30
F F
6 6
Eng. Mauro Sordini
(Chief Executive Officer)
WG3524HS
24 V
5 A
3 A
120 W
72 W
IP 44
470 MM
0,040 m/s
1500 N
650 N
30
F
6