Laserworld Ecoline Serie Bedienungsanleitung Seite 8

8.2. Music mode, Sound-to-light operation
Your device runs in music mode:
Control the music-sensitivity with the trim pot at the front panel. The LED is flas-
hing when the device is triggered.
8.3. DMX-512 mode
Switch 10 must be set to „off", the other switches are used for setting the DMX
address:
Connect a DMX controller to operate the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a
number. To define a number use the preceding number and multiply it by 2:
1 2
Switch
Number 1 2
The laser uses 12 DMX channels, so make sure that the next device uses an address
that doesn't overlap with this range.
3 4 5
4 8 16
6 7 8
32 64 128
9 10
256 Mode Switch