GUTMANN Palma 10/1001 I/W Montageanleitung Seite 42

EN
Ceiling mounting - island mounting - single piece tower
1. Remove plastic dummy plugs on the mo-
dule (4 pcs.), unscrew self-tapping screws
on the module cover (4 pcs.).
3. Mount the tower to the ceiling, screw the threaded rods from below into the threaded
nuts.
4. Remove the metal filter from
the cooker hood. Insert the
tubes (4 pieces) from below
into the motor module until
the metal clip on the inside
of the cover of the motor
module is in contact with the
cover.
42
ASSEMBLY INSTRUCTIONS
2. Push the tube from below into the mo-
tor module until the metal clip on the
inside of the cover of the motor module
is in contact ( 4 x ).
✓