Atag ZX6011Q Bedienungsanleitung Seite 115

using the various cooking modes
7) The memory function
If you would like to store the programme that you have just created into the
oven memory, then access this box and press the button:
The MEMORIES function enables you to memorise three cooking modes that
you have tried out using the Chef function. Using the memories, you will no lon-
ger need to always enter the same information. When cooking the same dish
with the same quantity of ingredients, you will always obtain the same results.
If you would like to store the programme that you have just defined into the
memory, access this box and press on the button.
The screen then proposes recording the information in an empty memory or
replacing one of the other memories with the new
information.
- After cooking, and before using the oven
again, it is possible to enter the information from the
last cooking session in the memory. Even after
having tasted your dish, it still isn't too late to record
the cooking mode used!
Instructions:
- Select the "Memories" function
- Press the selector button.
- Select "Last dish cooked". The screen displays the
last settings used for the last dish cooked.
- Press the selector button.
- Press on OK to confirm the settings.
- Select "Memorise".
- Press the selector button.
- Access the "Memories" option.
- Press the selector button.
- Select the memory number (1, 2 or 3)
- Press the selector button.
- The screen will then show you:
- Confirm
how to use your oven
either an empty memory,
or a full memory
Memories Memories
Last cooking
200 C
20 min 20 min
15:30
O K
200 C
B i o G r i l l +
20 min
S a v e
19:30
O K
1
Memory
200 C
20 min
O K
200 C
20 min
R e p l a c e
Setting
stored
115