Appendix B - Emc Information - KaVo IXS Benutzerhandbuch

Appendix
B
The KaVo IXS sensor is, like any electronic medical device, subject to
electromagnetic interactions with other electronic devices. The information in this
chapter addresses this issue.
The EMC information in this chapter is provided for the medical system established
by connecting the KaVo IXS sensor to a computer. This computer must be compliant
with IEC 60950-1 (if located outside the patient environment) or IEC 60601-1 (if
located inside the patient environment). Please consult the documentation of the
computer for complete EMC information.
The KaVo IXS sensor is suitable for use in hospitals except for near active HF
surgical equipment and the RF shielded room of an ME system for magnetic
resonance imaging, where the intensity of EM disturbance is high.
Portable/mobile radio frequency communications equipment can affect
Important:
the function of the KaVo IXS sensor as well as any other electronic
medical equipment. This affect may result in Image failure or image
quality degradation.
KaVo is a USB compliant device and shall be used with USB compliant
cables suitable for high speed/USB 2.0 cables. Such cables are either
marked "USB 2.0" or "USB high speed." USB certified hubs can be
used to extend the distance to the USB host/computer. The length of
the cable connection to the hub or between hubs shall not exceed 5 m.
KaVo IXS is a USB compliant device and shall be used with USB compliant cables
suitable for high speed/USB 2.0 cables. Such cables are either marked "USB 2.0"
or "USB high speed." USB certified hubs can be used to extend the distance to the
USB host/computer. The length of the cable connection to the hub or between hubs
shall not exceed 5 m.
WARNING
Use of accessories, transducers and cables other than those
specified or provided by the manufacturer of this equipment could
result in increased electromagnetic emissions or decreased
electromagnetic immunity of this equipment and result in improper
operation.
English
EMC Information
B-1