Strack PowerMax SN5650-PMOK-0065 Bedienungsanleitung Seite 46

PowerMax cam unit SN5650-PMOK-0065 — SN5650-PMOK-0165
Additional markings on slide retainer and slide body make it possible to control the position of the cam in
the tool.
If the cam is moved together, the upper markings correspond; if the cam is extended the lower markings
correspond.
If the marking on the slide body is between the markings of the slide retainer, the whole cam is not driven
back in the correct initial position.
Top Dead Center
This may be in case of crash or defective gas spring.
Here you have to check the gas spring.
Replace the gas spring if it is broken.
12
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
I
Operating instructions -- PowerMax cam unit PMOK
Bottom Dead Center
PowerMax