Connecting And Installating; Connecting The Cables; Installing The Counter Unit - Magnescale LT10A-Serie Bedienungsanleitung

3. Connecting and installating

3-1. Connecting the cables

• Secure all connecting cables so as to prevent accidental
disconnection.
• Make certain the counter unit's power is off before
connecting or disconnecting the measuring unit.

3-2. Installing the counter unit

When mounting in a panel
1. Cut out an opening to match the dimensions shown
(Fig. 2).
2. Insert the counter unit into the cut-out opening in the
panel from the front.
3. Attach the supplied counter stopper from the rear.
4. Press in the counter stopper until it touches the panel.
Note
When attaching the counter stopper to the counter unit,
leave enough space (min. 30 mm/1.18") between the top
and bottom. (Fig. 3)
LT10A / LT11A Series
Panel box
Front of counter unit
Cut-out dimensions
+1.0
68 /2.68"
+0.4
4-R1 or less
Panel thickness: max. 12/0.47"
Front of counter unit
Counter stopper
(supplied)
Fig. 1
+0.039"
+0.016"
Fig. 2
Counter stopper
(supplied)
(E)
Fig. 3
5