Mounting Procedure - Magnescale GB-A Serie Bedienungsanleitung

3-3. Mounting Procedure

Precautions
The procedures for mounting the scale unit are described
below.
For the scale unit, the only disassembly process during the
mounting work is removing the slider holder. (See 〈4〉.) Do
not disassemble other locations.
For the connection cable, the only disassembly process is
removing and mounting the case to perform the electrical
adjustments when the connection cable is procured
separately from the SR127/SR128 series. Do not
disassemble other locations.However, when the
connection cable is ordered together with the scale unit
(including the GB-A series), electrical adjustment is not
necessary. In these cases, be sure never to disassemble
the connection cable.
The scale unit is comprised of precision mechanical and
electromagnetic parts, so applying excessive force will
have a large effect on the unit's performance and service
life. Therefore, take care not to apply excessive force when
mounting the scale unit.
In addition, when carrying the unit, the scale body and
slider should be held together. Take care not to carry the
scale unit by the head cable or round connectors.
47