Dmx-Protocol; Cleaning And Maintenance; Replacing The Fuse - EuroLite LED PAR-64 RGB Floor Bedienungsanleitung

DMX-protocol

5 Channel Mode
Channel: Value:
CH1 000 – 255
Channel: Value:
CH2 000 – 255
Channel: Value:
CH3 000 – 255
Channel: Value:
CH4 000 – 255
Channel: Value:
000 – 000
001 – 005
CH5
006 – 010
011 – 255
3 Channel Mode
Channel: Value:
CH1 000 – 255
Channel: Value:
CH2 000 – 255
Channel: Value:
CH3 000 – 255

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
Dimmer (0 – 100%)
Function:
ON
Sound Control (7 colors)
ON
Strobe (increasing)
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
22/23 00066216, Version 1.2