Speaker Components - Samsung HT-D5000WXZF Handbuch

Connections

Speaker Components

HT-D4500
(L) (R)
FRONT
Speaker Components
HT-D4550
(L) (R)
FRONT STAND
(L) (R)
CENTRE
SURROUND SUBWOOFER
Installing the Speakers on the Tallboy Stand
HT-D4550 only
1.
Turn the Stand Base upside-down and connect it to
the Stand.
2. Insert small screws (4x20, For connecting Stand &
Stand Base) clockwise into the four holes marked
using a screwdriver as shown in the illustration.
!
CAUTION

When you use a torque screwdriver, be careful not to
put excessive force. Otherwise, it runs idle or can be
damaged. (torque screwdriver- below 15 kg.f.cm)
3. Connect the upper Speaker to the assembled Stand.
4. Insert another large screw (5x15, For connecting
Speaker & Stand) clockwise into the hole on the rear
of the speaker using a screwdriver.
5. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
18
English
HT-D4500_ELS_1223.indd 18 HT-D4500_ELS_1223.indd 18
(L) (R)
SURROUND
Assembled Speakers
SCREW (5X15): 4EA
SCREW (4X20): 16EA

SPEAKER CABLE
STAND BASE
CENTRE
SUBWOOFER
HT-D4550
FRONT SURROUND
SPEAKER SPEAKER
1
Stand
Base
Stand
3
Speaker
Stand
5
CENTRE
SPEAKER
SUBWOOFER
2
4
2011-12-23 2011-12-23 3:58:29 3:58:29