Switching On The Appliance; Setting The Temperature Unit; Setting The Temperature - Bosch KAD-Serie Montage- Und Gebrauchsanleitung

en

Switching on the appliance

When connected, the appliance is switched on. A
warning signal sounds.
Press the "alarm off/lock" button. The warning signal
switches off.
Display "alarm" goes out when the appliance has
reached the set temperature.
The preset temperatures are reached after several
hours. Do not put any food in the appliance
beforehand.
The factory has recommended the following
temperatures:
Freezer compartment: -18 °C
■
Refrigerator compartment: +4 °C
■

Setting the temperature unit

The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
Setting the temperature unit
To set the temperature unit, simultaneously press the
"super" button and the "options" button for 5 seconds.
Depending on the previous setting, the display
switches to the other temperature unit.
42

Setting the temperature

The required area must be selected before
temperatures can be set for the different climatic zones
(refrigerator compartment, freezer compartment):
1. Keep pressing the "select" button until the required
climatic zone is marked with an arrow.
2. Set the temperature with the + (warmer) or - (cooler)
setting buttons.
The value last indicated is saved by the system.
Freezer compartment
The freezer compartment can be set from -16 °C to
-24 °C.
We recommend a setting of -18 °C.
Refrigerator compartment
The refrigerator compartment can be set from +2 °C
to +8 °C.
The temperature can be set at 1 °C intervals.
Perishable food should not be stored above +4 °C.
We recommend a setting of +4 °C.