Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test - Siemens KS V-Serie Gebrauchsanleitung

en
Fault
The refrigerating unit
is switching on more
frequently and for
longer.
Appliance is not
cooling, temperature
display and light
are lit.

Appliance self-test

Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.

Starting the appliance self-test

1. Switch off the appliance and wait 5
minutes.
2. Switch on the appliance and hold
down the temperature selection
button, Fig. 2/4, for 3–5 seconds
within the first 10 seconds until 2 °C
is lit on the refrigerator compartment
temperature display.
The self-test programme starts, when
the temperature displays lit up in
succession.
28
Possible cause
Appliance opened
frequently.
The ventilation
openings have been
covered.
Showroom mode is
switched on.
Remedial action
Do not open the appliance
unnecessarily.
Remove obstacles.
Hold down temperature selection
button fig. 2/4 for 10 seconds until
an acknowledgement signal sounds.
After a short time check whether
your appliance is cooling.
When after a short time the appliance
displays the set temperature prior to the
self-test, everything is ok.
If the Super display flashes for 10
seconds, an error has occurred.
Inform customer service.

Ending the appliance self-test

When the programme has ended, the
appliance switches over to normal
operation.