Denon DVD-M330 Bedienungsanleitung Seite 14

Vorschau ausblenden

ENGLISH

w When "96k LPCM OUT" is selected:

Press the ENTER button several times and select the

conversion mode.

96k (Factory default)

When playing linear PCM DVDs that are not copyright-

protected, for 2-channel PCM audio signals up to 96 kHz,

linear PCM signals are output as such without being

converted from the digital outputs.

PCM signals of 48 kHz/16 bits and lower are output,

regardless of whether they are copyright-protected or not.

For DVDs containing multi-channel PCM signals, the

digital signals are down-mixed for output into two

channels, front left and right. (Only the front left and right

channels are output for sources for which down-mixing is

prohibited.)

When playing copyright-protected linear PCM DVDs, in

consideration of copyrights, no digital signals are output

for sources exceeding 48 kHz/16 bits. When playing such

sources, either set to "96k>48k" or make analog

connections. (See page 9.)

96k>48k

Linear PCM and packed PCM signals are converted to

44.1 kHz or 48 kHz and output. (The PCM digital audio

output signals are converted to 48 kHz or less in

consideration of copyrights.) When making digital

connections to an AV amplifier that is not compatible with

96 kHz/88.2 kHz signals, set to "96k>48k".

When playing DVDs recorded in linear PCM or packed

PCM and the unit is set to output digital and analog audio

signals simultaneously, the analog audio output signals

are also converted to 48 kHz or below, so we recommend

setting to "96k" and also making analog connections.

e When "DOWNMIX" is selected:

Press the ENTER button several times and select the

output format.

LT/RT (Factory default)

Set this when connecting the unit to a Dolby Pro Logic

decoder.

STEREO

Set this when connecting the unit to a stereo device.

r When "COMPRESSION" is selected:

OFF (Factory default)

Select this for the standard range.

LEVEL

Select this to achieve powerful sound even when the

volume is low. This setting is suited for watching DVDs

late at night with the volume low. (This setting is only

valid for DVDs recorded in Dolby Digital.)

To exit the setup mode

Press the RETURN or DVD SETUP button.

When "DISC SETUP" is selected

ENTER

Remote control unit

AUDIO SETUP

DIGITAL OUT

NORMAL

96K LPCM OUT

96K

DOWNMIX

LT/RT

OFF

COMPRESSION

SET ENT E R BUTTON

SELECT

SET 96K LPCM TO 48K OUT

AUDIO SETUP

DIGITAL OUT

NORMAL

96K LPCM OUT

96K

DOWNMIX

LT/RT

COMPRESSION

OFF

SET ENTE R BUTTON

SELECT

SET DOWNMIX MODE

AUDIO SETUP

DIGITAL OUT

NORMAL

96K LPCM OUT

96K

DOWNMIX

LT/RT

COMPRESSION

OFF

SELECT

SET ENTE R BUTTON

DYNAMIC RANGE COMPRESSION

2,3

See page 11.

Use the • and ª cursor buttons to select the desired setting,

then press the ENTER button.

DIALOG

Use this to set the language of the sound output from the

speakers.

SUBTITLE

Use this to set the language of the subtitles displayed on the

TV.

DISC MENUS

Use this to set the language of the menus recorded on the

disc (top menu, etc.).

ANGLE MARK

Angle marks are displayed/not displayed on the screen.

CAPTIONS

Use this to set whether or not to display the closed captions

recorded on DVDs.

NOTE:

Angle marks and captions are displayed when "SET UP

MENU MODE" at "SYSTEM SETUP" is set to "EXPERT" .

q When "DIALOG" is selected:

Press the ENTER button several times and select the

language.

ENGLISH (Factory default)