Connecting Your Tv And Playback Components; Connecting Using Hdmi - Pioneer SC-LX73 Kurzanleitung

02 Connecting your equipment

Connecting your TV and playback components

Connecting using HDMI

If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray disc player (BD), etc.), you can connect it to
this receiver using a commercially available HDMI cable.
If the TV and playback components support the Control with HDMI feature, the convenient Control with HDMI
functions can be used (see Control with HDMI function on Operating Instructions in CD-ROM).
HDMI/DVI-compatible
Blu-ray disc player
HDMI OUT
• When connecting to an HDMI/DVI-compatible
monitor using the HDMI OUT 2 terminal, switch the
HDMI output setting to HDMI OUT 2 or HDMI OUT
ALL. See Switching the HDMI output on Operating
Instructions in CD-ROM.
• For input components, connections other than HDMI
connections are also possible (see Connecting your
DVD player with no HDMI output on page 21).
Note
1 When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI Audio Return Channel function, the sound of the
TV is input to the receiver via the HDMI terminal, so there is no need to connect an audio cable. In this case, set TV Audio at HDMI Setup to
via HDMI (see HDMI Setup on Operating Instructions in CD-ROM).
20
En
Other HDMI/DVI-
equipped component
HDMI OUT
BD IN IN IN
HDMI
IN 1 2 3
ASSIGNABLE
1 4
COMPONENT VIDEO
ASSIGNABLE
IN 1 (DVD)
(DVR/BDR)
IN 2
ZONE2 ZONE3 DVD TV/SAT VIDEO
(VIDEO) OUT OUT IN IN IN
IN 3
MONITOR OUT
ZONE 2 OUT
Y P P
B R
ANTENNA
SPEAKERS
AM LOOP FM UNBAL 75
SELECTABLE
CONTROL IR 12 V
SEE INSTRUCTION
RS-232C
IN 1
TRIGGER
MANUAL
1
IN
SELECTABLE
VOIR LE MODE
(OUTPUT
(OUTPUT 5 V
D'EMPLOI
IN 2
12 V
150 mA MAX)
OUT
TOTAL
2
150 mA MAX)
OUT
CU-RF100
Select one
HDMI IN
DIGITAL OUT
COAXIAL OPTICAL
OUT 1 OUT 2 LAN ( 10/100 )
IN
(CONTROL)
4
COAXIAL OPTICAL
ASSIGNABLE
1 2 3 1
IN IN IN IN
MONITOR
(DVD) (CD) (CD-R) (TV/SAT)
OUT
VIDEO
CD-R/TAPE
DVR/BDR PHONO CD
OUT IN IN IN OUT IN FRONT CENTER SURROUND SURR BACK
SUBWOOFER
SIGNAL
GND
B
FRONT HEIGHT/WIDE/ SURROUND BACK
(Single)
R L R L
CAUTION:
SPEAKER IMPEDANCE 6 Ω - 16 Ω .
ATTENTION:
ENCEINTE D'IMPEDANCE DE 6 Ω - 16 Ω .
• If you want to listen to the sound of the TV over the
receiver, connect the receiver and TV with audio
1
cables.
HDMI/DVI-compatible
monitor
AUDIO OUT
ANALOG
R L
This connection is
required in order to
listen to the sound of
the TV over the
1
receiver.
ADAPTER PORT
(OUTPUT 5 V
100 mA MAX)
ASSIGNABLE
2 3
IN IN
O
(DVR/BDR) (VIDEO)
FH/FW FRONT CEN
(Single)
PRE OUT
SUBW
SURROUND
R L