Elevation Adjustment - Schmidt & Bender 3-12x50 Zenith Bedienungsanleitung

Operating Manual
Page 15 of 20
3-12x50 Zenith

5.2 Elevation adjustment

The point of impact is moved by 1cm on 100 m on every click. A too low point
of impact is corrected by rotating the elevation turret clockwise into the
direction indicated by "H" or "U", a too high point of impact by rotating the
elevation turret counter-clockwise into the direction indicated by "T" or "D"
(see Illustr. 9).
Illustr. 9: Elevation adjustment
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de