Intended Use - Scheppach PWS-115 Original Bedienungsanleitung

4. Intended use

This machine is intended to be used as a grinder or a cut-off tool.
Sanding, polishing, hole cutting and wire brushing are not recommend-
ed to be performed with this tool.
The equipment is to be used only for its prescribed purpose. Any other
use is deemed to be a case of misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries of any kind caused
as a result of this.
To use the equipment properly you must also observe the safety infor-
mation, the assembly instructions and the operating instructions to be
found in this manual.
All persons who use and service the equipment have to be acquainted
with this manual and must be informed about the equipment's potential
hazards.
It is also imperative to observe the accident prevention regulations in
force in your area.
The same applies for the general rules of health and safety at work.
The manufacturer will not be liable for any changes made to the equip-
ment nor for any damage resulting from such changes.
The machine may be used only with original accessories and original
tools of the manufacturer.
The safety, workplace and maintenance instructions of the manufac-
turer as well as the dimensions specified in the technical data must be
observed.
Please note that our equipment has not been designed for use in com-
mercial, trade or industrial applications. Our warranty will be voided if
the equipment is used in commercial, trade or industrial businesses or
for equivalent purposes.
GB | 39
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58