Clutch lever
Lever (1) disengages the clutch. It features a dial
adjuster (2) for lever distance from the twistgrip on
handlebar.
Lever distance from twistgrip is set via knob (2) (10 click
positions). Turn clockwise to push lever far from twistgrip,
or counterclockwise to take it closer.
When you pull lever (1), transmission is disengaged from
the engine to the gearbox and therefore from the driving
wheel. Using the clutch properly is essential to smooth
riding, especially when moving off.
Warning
Set clutch and brake lever when motorcycle
is stopped.
Important
Using the clutch properly will avoid damage to
transmission parts and spare the engine.
Notes
It is possible to start the engine with side stand down
and the gearbox in neutral. When starting the bike with a
gear engaged, pull the clutch lever (in this case the side
stand must be up).
2
1
E
fig. 19
27