Trevi HCX 10D6 DAB Bedienungsanleitung Seite 13

ENGLISH
VOLUME CONTROL AND EQUALIZER FUNCTION
1. Turn the Volume control (6) on the appliance or press the VOL +/- keys (25) on the remote control to increase or decrease
the volume;
2. Press the EQ button (18) on the remote control several times to select one of the preset audio dynamics (Classic, Rock, Pop,
Jazz, Flat).
RADIO DAB/DAB+ OPERATION
1. Switch on the appliance and press the FUNC key (15) on the remote control several times until the indication DAB appears on
the display;
The first time the radio is turned on it will scan and store automatically all available DAB stations.
2. If you want to repeat the scan station operation, press and hold
scanning the DAB stations, or press the MENU button (21) on the remote control to access the DAB menu. Search and select
the word "Full scan";
:
3. Press the button (4) or
various tuned DAB stations;
4. Press the VOLUME/ENTER control (6) on the unit, or the
to start playback;
5. Press the INFO button (23) on the remote control several times to display all the information on the station received.
STORING RADIO STATIONS
To store a radio station, do as following:
1. Tune in to the desired radio station;
2. Press and hold the PROG button (24) for a few seconds, the display will show the word "PRESET STORE";
: 9
3. Use the (26) and

4. Press the button (19) to confirm and save the radio station;
Repeat this for each radio station you wish to save. 30 memory locations are available.
5. To recall a stored radio station use thei F+/CH+ (28) and F-/CH- (27) buttons.
DAB/DAB+ MENU
1. Press MENU button (21) of remote control to enter the DAB menu;
:
2. Press the key (4) or
menu items;
3. Press the VOLUME/ENTER control (6) on the unit, or
Full scan: allows you to scan the entire DAB/DAB+ band and automatically store the found stations.
Manual tune: allows you to manually scan a single DAB/DAB+ frequency. Press
channel number for the frequency to be scanned and then press
be automatically stored.
DRC: allows you to enable / disable the DRC function to improve the sound while listening in noisy environments. The DRC
level can be set up (high), low (low) or OFF (off).
Prune: allows you to delete from the list of stations stored all the radio found but not available (poor signal). Move with the
: 9
keys (26) and
System: allows access to the system submenu:
Time: allows you to set the current time/date.
Set Time/Date: set the current time and date.
Auto Update: select from which source to automatically set the time and date if available.
Set 12/24 Hour: set the time format 12/24H.
Set Date Format: set the date format.
Back light: allows you to set the time and brightness level of the display:
Timeout: display lighting time adjustment (10sec, 20sec, 30sec., 45sec, 60sec, 90sec, 120sec, 180sec,
ON).
On level: adjustment of the display lighting degree with the appliance running (High, Medium, Low).
Dim level: adjustment of display lighting degree in Stand-by mode (High, Medium, Low).
Language: it is possible to choose the language of the menus; Italian, English (default), Deutsch, Italian, Francais are available.
Factory Reset: allows you to reset the device to the factory settings. At the end of the reset an automatic scan of the DAB/
DAB+ stations will be performed. Move with the keys
9
(3) on the unit, or the button
(20) buttons to select a memory location;
9
(3) on the unit, or the keys
(20) to Y (YES) and confirm the deletion with
 (19) on the remote control for a few seconds to start
: 9
(26) or (20) on the remote control to scroll through the
 button (19) on the remote control on the desired DAB station
: 9
(26) or (20) on the remote control to display the various DAB
 button (19) on the remote control to select the displayed menu item:

(19) button to start scanning. The found stations will

(19).
: 9
(26) and (20) to Y (YES) and confirm with
HCX 10D6 DAB
: 9
(26) or (20) buttons to select the

(19).
13