Functions; Operating Your New Appliance - Sage Smart Grill BGR820 Kurzanleitung

Functions

OPERATING YOUR NEW APPLIANCE

PREHEATING THE GRILL
1. Ensure the top plate of the grill is in the
closed position, with the Height Control
Clip in the OPEN position. This will ensure
faster, more efficient preheating.
2. Turn the temperature dial to adjust the
temperature in 5°C increments. Rotate
the dial to SEAR (210°C–230 °C) for fast
preheating, PANINI (sandwich) (180°C–
205°C), LOW (160°C –175°C) or select
an alternative temperature.
3. The grill will start to heat, and the LCD
screen will illuminate orange. The selected
temperature as well as HEATING will be
displayed
4. Once the grill has preheated to the
selected temperature, one alert will sound,
and HEATING will no longer illuminate.
The LCD screen will display the selected
temperature and the time will default to '0'.
NOTE
Always allow the grill to completely preheat to
the selected temperature before cooking.
The LCD screen may display HEATING
during the cooking process. This is normal,
indicating that the correct temperature is
being maintained.
ADJUSTABLE HEIGHT CONTROL
This feature reduces the weight of the
top plate on delicate foods like fish and
accommodates varying thicknesses of food
like artisan breads. Located on the right side
of the top plate, the clip fixes the top plate to
a range of positions above the bottom plate.
To set the adjustable height control, use the
handle to lift the top plate and simultaneously
move the adjustable height control clip to
the desired height. Then slowly lower the top
plate until it rests on the adjustable height
control clip.
ADJUSTABLE TILT CONTROL
The angle of the cooking plates can be
adjusted by turning the PLATE TILT dial.
The PLATE TILT dial is located on the lower
back, right side of the grill. The unique indent
between the two cooking plates channels
juices from both plates into the same drip tray
while cooking.
TEMPERATURE CONVERSION BUTTON
• The grill features a temperature conversion
button on the left side of the LCD screen.
The temperature reading on the grill is
preset to Celsius. Pressing the temperature
conversion button converts the Celsius
temperature reading into Fahrenheit. The
corresponding °C or °F symbol will be
displayed on the LCD screen.
• If you have changed the default Celsius
temperature reading to Fahrenheit, the
setting will remain in the memory of the grill
until the Temperature Conversion Button
is pressed a second time or the grill is
unplugged from the wall outlet. When the
grill is plugged back into the wall outlet,
the temperature reading will automatically
return to the preset Celsius setting.
EN
9