Diagnostics; Led Status Displays - Lenze L-force DeviceNet E94AYCDN Montageanleitung

8

Diagnostics

LED status displays

Pos. Colour / status
ST
green is on
green is blinking
ER red is on
MS
green red
off off
off on
off blinking
on off
blinking off
blinking blinking
NS
green red
off off
off on
off blinking
on off
blinking off
blinking blinking
DE red is on
EDK94AYCDN DE/EN/FR/ES/IT 3.0
Description
The communication module is supplied with voltage and has a
connection to the standard device.
The communication module is supplied with voltage but is not
connected to the standard device (standard device is switched off,
being initialised, or not available).
An error has occurred on the communication module.
The communication module is not supplied with voltage.
The communication module is defective and must be replaced.
The error in the communication module can be removed.
The communication module works properly.
The communication module has not been completely configured yet
or configuration is faulty.
The communication module is in self−test mode.
The communication module is not supplied with voltage via
DeviceNet or the "Duplicate MAC ID" test has not been completed
yet.
The communication module cannot access the bus ( e.g. "Duplicate
MAC ID", bus off, invalid baud rate etc.).
The error in the communication module can be removed.
The communication module works properly and has established a
connection to the scanner.
The communication module ...
l
works properly;
l
has completed the "Duplicate MAC ID" test;
l
has not yet been integrated by the scanner.
The communication module ...
l
is in error status;
l
has received and accepted a telegram for identifying the faulty
devices ("Identify Communication Faulted Request").
The communication module is not accepted by the standard device
(see notes given in the documentation of the standard device).
l
Diagnostics
LED status displays
8
43