10V With Water Temperature Monitoring; Without Control Panel; Confi Guration Code: Dpc.cc71 / Dpc.cc72 - Jaga CLIMA CANAL-JDPC Gebrauchsanweisung

Control :
Press and hold to switch modes (± 3 sec ).
3"
Off
Manually changing the fan speed : short press
Red LEDs are flashing: the water temperature for heating is too low (< 28 ̊ C ).
Blue LEDs are flashing: the water temperature for cooling is too high (> 18 ̊ C ).
2. 0-10V WITH WATER TEMPERATURE MONITORING
0-10 V
24 V +
GND
2.1. WITHOUT CONTROL PANEL -
The device is controlled via BMS.
The unit starts if the water temperature is > 28°C/82 ̊ F and the control signal is 0-10V.
Only with configuration code DPC.CC72. The unit starts if the water temperature is < 18 ̊ C /64 ̊ F
and the control signal is 0-10V.
Fan speed in function of the incoming control signal.
24
1
Configuration code : DPC.CC71 / DPC.CC72
JAGA N.V. | CLIMA CANAL - JDPC | MANUEL | 11.02.2021 | V.01
Off
[7]
DPC.CC25