BURG WÄCHTER BURGcam LIGHT 3010 Kurzanleitung Seite 39

Step 2:
Required materials:
• Electric drill (not included)
• 4mm drill bit, suitable for the mounting surface (not included)
• Cross screwdriver (not included)
• Assembly set from the packaging
Drill three holes for fixing the mounting foot. Insert the wall plugs
into the holes. Arrange the mounting foot to the holes and place
one of the supplied screws into each hole using across-head screw
driver.
Note: If you use a cordless screwdriver with bits, make sure to set
a low torque before tightening the screws.
BURGcam LIGHT 3010 English | 39